Scopus
🔓 Açık Erişim YÖKSİS Eşleşti
A short review on thermal treatments of Titanium & Nickel based alloys processed by selective laser melting
Journal of Materials Research and Technology · Ocak 2022
YÖKSİS Kayıtları
A short review on thermal treatments of Titanium & Nickel based alloys processed by selective laser melting
Journal of Materials Research and Technology · 2022 SCI-Expanded
DOÇENT MUSTAFA KUNTOĞLU →
Makale Bilgileri
DergiJournal of Materials Research and Technology
Yayın TarihiOcak 2022
Cilt / Sayfa16 · 1090-1101
Scopus ID2-s2.0-85121853435
Erişim🔓 Açık Erişim
Özet
Selective laser melting (SLM) has been considered as a well-researched technology used to produce near net shape metallic components with superior mechanical and physiochemical characteristics. Recently SLM has recently been used for the production of components made by high-performance alloys such as Titanium and Nickel. However, the microstructural and physical anisotropy along with the defects have negative impact on the performance and behavior of SLM-produced alloys. Therefore, to improve the material characteristics, extra attention must be paid to the source(s), identification, and removal of these deviations. Thermal heat treatments are often considered as an effective approach to deal with aforementioned issues. stress-relieving, quenching/hardening, annealing/recrystallization, and thermo-mechanical heat treatments are among prominent procedures adopted for the post processing of SLM fabricated metallic components and hence considered in this article. Since these procedures have substantial impact on the microstructure and mechanical behavior therefore an assessment of their influence and resulting changes is significantly important. Therefore, this short review provides the said knowledge on thermal treatments used to improve the SLM fabricated titanium and nickel-based alloys. This review can significantly help in designing and selecting appropriate post processing thermal treatments keeping in mind the expected outcome.
Yazarlar (7)
1
Mehmet Erdi Korkmaz
2
Munish Kumar Gupta
ORCID: 0000-0002-0777-1559
3
Saad Waqar
ORCID: 0000-0002-3645-4720
4
Mustafa Kuntoğlu
ORCID: 0000-0002-7291-9468
5
Grzegorz M. Krolczyk
6
Radosław W. Maruda
ORCID: 0000-0003-0580-2216
7
Danil Yurievich Pimenov
Anahtar Kelimeler
Additive manufacturing
Heat treatment
SLM
Titanium & nickel based alloys
Kurumlar
Karabük Üniversitesi
Karabuk Turkey
Opole University of Technology
Opole Poland
Selçuk Üniversitesi
Selçuklu Turkey
Shandong University
Jinan China
South Ural State University
Chelyabinsk Russian Federation
Uniwersytet Zielonogórski
Zielona Gora Poland
Metrikler
41
Atıf
7
Yazar
4
Anahtar Kelime