Scopus
YÖKSİS DOI Eşleşti
SJR Q1
Investigation of explosive welding parameters and their effects on microhardness and shear strength
Materials and Design · Ocak 2003
YÖKSİS Kayıtları
Investigation of explosive welding parameters and their effects on microhardness and shear strength
Materials & Design · 2003 SCI
Prof. Dr. MUSTAFA ACARER →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Ultrahigh antibacterial response and biochemical activity in Mg-Sn-HA material systems
2025 ISSN: 0264-1275 SCI-Expanded Q1
Doç. Dr. EMİN SALUR →
Design and applications of a pneumatic accelerator for high speed punching
2007 ISSN: 0264-1275 SCI
Prof. Dr. HAKAN IŞIK →
Ultrahigh antibacterial response and biochemical activity in Mg-Sn-HA material systems
2025 ISSN: 0264-1275 SCI Q1
Dr. Öğr. Üyesi HALİT SÜBÜTAY →
Makale Bilgileri
Dergi
Materials and Design
ISSN02641275
Yayın TarihiOcak 2003
Cilt / Sayfa24 · 659-664
Scopus ID2-s2.0-0242573092
Özet
The aim of this study was to investigate the strength of explosive welded metals with the same chemical compositions. Different welding interfaces (straight, wavy and continuous solidified-melted) were used with changing explosive welding parameters [stand-off distance ( s ), explosive loading ( R ) and anvils]. Joined metals were investigated under heat-treated and untreated conditions. Results on the microstructure, microhardness, tensile shear strength and bending tests are reported. According to the experimental results, the effect of the anvil on the explosive welding process was only the joining or not-joining performance. It was shown that the bonding interface changed from a straight to a wavy structure when the explosive loading and stand-off distance were increased. For wavy interfaces, when the explosive loading was increased the wavy length and amplitude increased. Results of tensile shear and bending tests showed that heat-treated specimens have more strength than untreated samples. According to tensile shear test results, straight and wavy interfaces had similar strength. In addition, in bending tests of untreated specimens it was shown that the bending zone had some cracks. © 2003 Elsevier Ltd. All rights reserved.
Yazarlar (3)
1
Mustafa Acarer
2
B. Gülenç
3
Fehim Fındık
Anahtar Kelimeler
Bending strength
Explosive welding
Solid-state welding
Tensile shear strength
Kurumlar
Bülent Ecevit University
Zonguldak Turkey
Gazi Üniversitesi
Ankara Turkey
Sakarya Üniversitesi
Serdivan Turkey
Son Atıflar
The punching of DP1000 automotive steel–Al laminate composite fabricated by explosive welding: Effect of tool geometry on cutting force and cut surfaces
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
· 2026 · DOI
Development and calibration of a weldability window for Al-Ti composite by magnetic pulse welding
Materials and Manufacturing Processes
· 2026 · DOI
The Combined Influence of the Detonator Position and Anvil Type on the Weld Quality of Explosively Welded A1050/AZ31 Joints
Metals
· 2026 · DOI
Influence of Twist Channel Angular Pressing Process on Microhardness and Microstructural Behavior of Explosively Welded Al/Cu Plates
Materials
· 2026 · DOI
Dynamic shear behavior and fracture characteristics of corrugated multi-interface Q245R/TA1/1060Al composite plate by explosive welding
Engineering Fracture Mechanics
· 2025 · DOI
Ballistic and interfacial properties of Al-Ti armor materials produced by explosive welding
International Journal of Advanced Manufacturing Technology
· 2025 · DOI
Manufacturing methods, bonding mechanisms, and mechanical properties of titanium/steel clad plates
Frontiers of Materials Science
· 2025 · DOI
Analysis and experiment of flat electromagnetic pulse welding process based on magnetic field shaper
International Journal of Advanced Manufacturing Technology
· 2025 · DOI
Superior interface properties and unusual deformation mechanisms of high-entropy alloys through explosive welding
Journal of Materials Research and Technology
· 2025 · DOI
Study of Explosive Welding Stainless of Steel 06Cr18Ni11Ti / Cast Steel 20Mn
Blasting
· 2025 · DOI
Scimago Dergi (ISSN Eşleşmesi)
Materials and Design
Q1
OA
SJR Skoru1,727
H-Index256
YayıncıElsevier B.V.
ÜlkeNetherlands
Materials Science (miscellaneous) (Q1)
Mechanical Engineering (Q1)
Mechanics of Materials (Q1)
Metrikler
206
Atıf
3
Yazar
4
Anahtar Kelime