Scopus
YÖKSİS Eşleşti
An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel
Materials Letters · Eylül 2008
YÖKSİS Kayıtları
An investigation of mechanical and metallurgical properties of explosive welded aluminum\u2013dual phase steel
Materials Letters · 2008 SCI-Expanded
PROFESÖR MUSTAFA ACARER →
Makale Bilgileri
DergiMaterials Letters
Yayın TarihiEylül 2008
Cilt / Sayfa62 · 4158-4160
Scopus ID2-s2.0-48949115274
Özet
The aim of this paper is investigation of microstructure and property relationship in aluminum-HSLA steel and aluminum-dual phase steel bimetals fabricated by explosive welding technique. Dual phase steel was produced by intercritical annealing and water quenching from 1.45Mn-0.2Si-0.186C HSLA steel. Hardness, tensile shear strength, tensile strength, toughness and microstructure of explosively welded aluminum-HSLA steel and aluminum-dual phase steel were evaluated. Both bimetals have a straight bonding interface. It was also seen that plastic deformation of dual phase steel was higher than HSLA steel near interfaces of bimetals. The hardness was increased near the bond interface of bimetals. Tensile and tensile shear strength tests showed that aluminum-dual phase steel is superior than aluminum-HSLA steel. Also, impact toughness of aluminum-dual phase steel was found significantly higher than that of aluminum-HSLA steel. © 2008 Elsevier B.V. All rights reserved.
Yazarlar (2)
1
Mustafa Acarer
2
Bilge Demir
Anahtar Kelimeler
Dual phase steel
Explosive welding
Mechanical properties
Microstructural
Kurumlar
Karabük Üniversitesi
Karabuk Turkey
Metrikler
201
Atıf
2
Yazar
4
Anahtar Kelime