Scopus
YÖKSİS DOI Eşleşti
SJR Q1
A simple approach to analyze process damping in chatter vibration
International Journal of Advanced Manufacturing Technology · Şubat 2014
YÖKSİS Kayıtları
A simple approach to analyze process damping in chatter vibration
The International Journal of Advanced Manufacturing Technology · 2014 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Cost optimization of submersible motors using a genetic algorithm and a finite element method
2007 ISSN: 0268-3768 SCI-Expanded
Prof. Dr. MEHMET ÇUNKAŞ →
Modelling of Dynamic Cutting Force Coefficients and Chatter Stability Dependent on Shear Angle Oscillation
2017 ISSN: 0268-3768 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
A simple approach to analyze process damping in chatter vibration
2014 ISSN: 0268-3768 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
Failure analysis of support during profile cutting process using horizontal milling machine
2014 ISSN: 0268-3768 SCI-Expanded 1 atıf
Prof. Dr. SÜLEYMAN NEŞELİ →
A state-of-the-art review on sensors and signal processing systems in mechanical machining processes
2021 ISSN: 0268-3768 SCI-Expanded Q2
Doç. Dr. EMİN SALUR →
Influence of tool path strategies on machining time, tool wear, and surface roughness during milling of AISI X210Cr12 steel
2022 ISSN: 0268-3768 SCI-Expanded Q2
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites
2021 ISSN: 0268-3768 SCI-Expanded Q2
Doç. Dr. MUSTAFA KUNTOĞLU →
Influence of tool path strategies on machining time, tool wear, and surface roughness during milling of AISI X210Cr12 steel
2022 ISSN: 0268-3768 SCI Q2
Doç. Dr. MUSTAFA KUNTOĞLU →
Indirect monitoring of machining characteristics via advanced sensor systems: a critical review
2022 ISSN: 0268-3768 SCI-Expanded Q2
Doç. Dr. MUSTAFA KUNTOĞLU →
Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites
2021 ISSN: 0268-3768 SCI-Expanded Q2
Doç. Dr. MUSTAFA KUNTOĞLU →
A state of the art on surface morphology of selective laser-melted metallic alloys
2023 ISSN: 0268-3768 SCI-Expanded Q2
Dr. Öğr. Üyesi EYÜB CANLI →
Theoretical and experimental research of edge inclination angle effect on minimum uncut chip thickness in oblique cutting of C45 steel
2022 ISSN: 0268-3768 SCI-Expanded Q2
Doç. Dr. MUSTAFA KUNTOĞLU →
An investigation of the shearing performance and sheared surface characterisation of ultra-strength DP steel-Al explosive welded plate composite
2023 ISSN: 0268-3768 SCI-Expanded Q2
Prof. Dr. MUSTAFA ACARER →
Makale Bilgileri
ISSN02683768
Yayın TarihiŞubat 2014
Cilt / Sayfa70 · 775-786
Scopus ID2-s2.0-84896737405
Özet
This paper investigates how changes in chatter amplitude and frequency depend on process damping effect in dynamic turning process. For this purpose, the two degrees of freedom (TDOF) cutting system was modeled, and for an orthogonal turning system, the process damping model with a new simple approach was developed. To further explore the nature of the TDOF cutting model, a numerical simulation of the process was developed by this model. This simulation was able to overcome some of the weaknesses of the analytical model. The equations of motion for this cutting system were written as linear and nonlinear in the τ-decomposition form. The variation in the process damping ratios for different work materials was simply obtained by solving the nonlinear differential equations. A series of orthogonal chatter stability tests were performed for the identification of dynamic cutting force coefficients, using AISI-1040, Al-7075, and Al-6061 work materials, at a constant spindle speed. Finally, the experimental results were analyzed and compared with the simulation model, and it was observed that the results obtained through the experiments comply with the simulation model results. © 2013 Springer-Verlag London.
Yazarlar (2)
1
Erol Turkes
2
Süleyman Neşeli
Anahtar Kelimeler
Chatter vibration
Cutting stability
Process damping
Kurumlar
Dumlupinar Üniversitesi
Kutahya Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
International Journal of Advanced Manufacturing Technology
Q1
SJR Skoru0,706
H-Index175
YayıncıSpringer London
ÜlkeUnited Kingdom
Industrial and Manufacturing Engineering (Q1)
Computer Science Applications (Q2)
Control and Systems Engineering (Q2)
Mechanical Engineering (Q2)
Software (Q2)
Metrikler
13
Atıf
2
Yazar
3
Anahtar Kelime