CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus YÖKSİS DOI Eşleşti SJR Q1

The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings

Composites Part A Applied Science and Manufacturing · Aralık 2023

YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings
Composites Part A: Applied Science and Manufacturing · 2023 SCI-Expanded
Doç. Dr. HASAN ULUS →
YÖKSİS ISSN Eşleşmesi

Bu dergide (ISSN eşleşmesi) kurumun 8 kaydı bulundu.

YÖKSİS Kayıtları — ISSN Eşleşmesi
The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings
2023 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: Comparative analysis of atmospheric plasma activation and conventional treatments
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Assessing the fracture and dynamic mechanical performance of CF/PEKK joints bonded with epoxy-based adhesive film for aerospace applications: Impact of thermal and cycling hygrothermal conditions
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Impact damage and low temperature effects on carbon fiber/epoxy joints: A comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates
2025 ISSN: 1359-835X SCI Q1
Doç. Dr. HASAN ULUS →
Analyzing stiffness variations in 3D woven composites: A multi-instrumental study on Glass/Kevlar hybridization effects under tensile and shear loads
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Ameliorating tensile and fracture performance of carbon fiber-epoxy composites via atmospheric plasma activation: Insights into damage modes through in-situ acoustic emission inspection
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →

Makale Bilgileri

Dergi Composites Part A Applied Science and Manufacturing
ISSN1359835X
Yayın TarihiAralık 2023
Cilt / Sayfa175
DOI10.1016/j.compositesa.2023.107753
Scopus ID2-s2.0-85170083634
Özet This work aims to evaluate the effectiveness of inter-ply/intra-tow hybridization in 3D woven composites to achieve an ameliorated impact and flexural performance. In this regard, inter-ply/intra-tow hybrid epoxy composites with Kevlar, E-glass, and ultra-high-molecular-weight polyethylene (UHMWPE) reinforced 3D fabrics are manufactured using the vacuum infusion method. To scrutinize the static and dynamic responses, the produced composites are subjected to flexural and low-velocity impact (50, 100, and 150 J) tests. The findings show that inter-ply hybrid composites exhibit more improved impact and flexural performance than their intra-tow hybrid counterparts. While the elastic moduli and strength values of weft-directional hybrid composites increase, on the contrary, warp-directional counterparts do not display an enhancement in flexural performance. Scanning electron microscopy (SEM) examinations and acoustic emission analysis are conducted together on the bending specimens to understand failure mechanisms leading to observed mechanical responses.

Yazarlar (5)

1
Abdulrahman Al-Nadhari
ORCID: 0000-0003-0461-6905
2
Halil Senol
ORCID: 0000-0003-4808-4023
3
Serra Topal
ORCID: 0000-0002-0726-2420
4
Hasan Ulus
ORCID: 0000-0001-8591-8993
5
Mehmet Yildiz
ORCID: 0000-0003-1626-5858

Anahtar Kelimeler

A. 3-Dimensional reinforcement B. Mechanical properties D. Fractography D. Non-destructive testing

Kurumlar

Center for Composite Materials
Newark United States
Sabancı Üniversitesi
Tuzla Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Composites Part A: Applied Science and Manufacturing
Q1
SJR Skoru1,517
H-Index240
YayıncıElsevier Ltd
ÜlkeUnited Kingdom
Ceramics and Composites (Q1)
Mechanics of Materials (Q1)
Dergi sayfasına git

Metrikler

46
Atıf
5
Yazar
4
Anahtar Kelime

Sistemimizdeki Yazarlar

HU
HASAN ULUS
Doç. Dr.

Hızlı Erişim

DOI ile aç Scopus'ta aç Makaleler listesi