Scopus
YÖKSİS DOI Eşleşti
SJR Q2
Machining and optimization of reinforced copper composites using different cooling-lubrication conditions
Journal of the Brazilian Society of Mechanical Sciences and Engineering · Eylül 2022
YÖKSİS Kayıtları
Machining and optimization of reinforced copper composites using different cooling-lubrication conditions
Journal of the Brazilian Society of Mechanical Sciences and Engineering · 2022 SCI-Expanded
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Effect of Cr particulate reinforcements in different ratios on wear performance and mechanical properties of Cu matrix composites
2018 ISSN: 1678-5878 SCI
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
Experimental investigation of the cetane improver and bioethanol addition for the use of waste cooking oil biodiesel as an alternative fuel in diesel engines
2020 ISSN: 1678-5878 SCI-Expanded
Prof. Dr. İLKER ÖRS →
Machining and optimization of reinforced copper composites using different cooling-lubrication conditions
2022 ISSN: 1678-5878 SCI-Expanded Q3
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
Impact of boron nitride and silicon carbide on tribological properties of Al-3Gr-based hybrid composites
2023 ISSN: 1678-5878 SCI-Expanded Q3
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
Assessment of the machinability and energy consumption characteristics of Cu–6Gr hybrid composites under sustainable operating
2024 ISSN: 1678-5878 SCI-Expanded Q3
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
Finite element analysis and statistical investigation of S960ql structure steel machinability with milling method
2024 ISSN: 1678-5878 SSCI
Prof. Dr. SÜLEYMAN NEŞELİ →
Makale Bilgileri
ISSN16785878
Yayın TarihiEylül 2022
Cilt / Sayfa44
Scopus ID2-s2.0-85136319099
Özet
During the processing of metal matrix composite materials, some negative situations may occur due to the interaction between the tool and the workpiece. Wear and damage may occur on the side surfaces of the cutting tool used. In order to eliminate these adverse conditions, generally cooling liquids are used. In this study, the machinability properties of cryogenic LN2 and minimum quantity lubrication (MQL) techniques on Co-Ti added copper composites were investigated using CNC milling. Taguchi L16 orthogonal array was chosen as the experimental design. The machining parameters testing, 2 distinct cutting speeds (200–300 m/min), 2 distinct feed rates (0.2–0.3 mm/rev), and a single cutting depth (0.25 mm) were used. Copper composites produced at different rates (0–5–10–15 wt. %); surface roughness, tool wear, cutting temperature and chip morphologies were investigated. Taguchi and analysis of variance (ANOVA) were used to assess the impacts of cutting parameters on surface roughness, flank wear, and cutting temperature. Cryo-LN2 was found to be the best cutting environment for surface roughness, flank wear and cutting temperature. Chips obtained with cryo-LN2 were found to be more efficient. Graphical abstract: [Figure not available: see fulltext.]
Yazarlar (3)
1
Emine Şap
ORCID: 0000-0002-7739-0655
2
Üsame Ali Usca
3
Mahir Uzun
ORCID: 0000-0002-0907-6875
Anahtar Kelimeler
ANOVA
CNC milling
Cryogenic LN 2
Cu composites
MQL
Kurumlar
Bingöl Üniversitesi
Bingol Turkey
Inönü Üniversitesi
Malatya Turkey
Scimago Dergi (ISSN Eşleşmesi)
Journal of the Brazilian Society of Mechanical Sciences and Engineering
Q2
OA
SJR Skoru0,466
H-Index67
YayıncıSpringer Verlag
ÜlkeGermany
Aerospace Engineering (Q2)
Applied Mathematics (Q2)
Automotive Engineering (Q2)
Engineering (miscellaneous) (Q2)
Industrial and Manufacturing Engineering (Q2)
Mechanical Engineering (Q2)
Metrikler
9
Atıf
3
Yazar
5
Anahtar Kelime