CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus YÖKSİS Eşleşti

Determination of mechanical and tribological properties of vacuum sintered hybrid reinforced Al-4Cu composites

Journal of Composite Materials · Kasım 2024

YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
Determination of mechanical and tribological properties of vacuum sintered hybrid reinforced Al-4Cu composites
Journal of Composite Materials · 2024 SCI-Expanded
DOKTOR ÖĞRETİM ÜYESİ ÜSAME ALİ USCA →

Makale Bilgileri

DergiJournal of Composite Materials
Yayın TarihiKasım 2024
Cilt / Sayfa58 · 2799-2815
Özet This study aims to modernize commonly preferred hybrid aluminum composites in the automotive and defense industries. For this purpose, Al-4Cu/B4C-SiC hybrid composites were manufactured using the hot pressing method and their microstructure, mechanical, and tribological properties were investigated. SEM/EDS analyses of the samples were conducted to examine morphological characteristics. Hardness, relative density, and three-point bending tests were performed on the produced samples. Additionally, wear tests were conducted under dry sliding conditions and different loads (5-10-15 N) to investigate tribological properties. The addition of hybrid reinforcements resulted in high hardness (88.54 HB) and relative density (98.83%) values. The highest bending stress (556.9 MPa) was observed in sample AC-4 (Al-4Cu/2B4C-2SiC). The lowest mass loss (1.1 × 10−3 g) was encountered in sample AC-6 (Al-4Cu/6B4C-6SiC), where all reinforcements were present together. Plastic deformation, oxidation, and residual wear mechanisms were identified on the worn surfaces of the samples. Consequently, the addition of hybrid reinforcements to Al-4Cu composites shows promising potential in enhancing the mechanical and tribological performance of the composites.

Yazarlar (4)

1
Üsame Ali Usca
2
Serhat Şap
ORCID: 0000-0001-5177-4952
3
Mahir Uzun
ORCID: 0000-0002-0907-6875
4
Ünal Değirmenci

Anahtar Kelimeler

mechanical properties microstructure Novel hybrid composites tribology

Kurumlar

Bingöl Üniversitesi
Bingol Turkey
Inönü Üniversitesi
Malatya Turkey

Metrikler

11
Atıf
4
Yazar
4
Anahtar Kelime