Scopus
YÖKSİS Eşleşti
Experimental investigation, modeling and optimization study on the mechanical properties of B<inf>4</inf>C<inf>p</inf>/MWCNT/epoxy multi-scale hybrid composite
Polymers and Polymer Composites · Kasım 2021
YÖKSİS Kayıtları
Experimental investigation, modeling and optimization study on the mechanical properties of B4Cp/MWCNT/epoxy multi-scale hybrid composite
POLYMERS & POLYMER COMPOSITES · 2021 SCI
DOÇENT MUSTAFA TAŞYÜREK →
Experimental investigation, modeling and optimization study on the mechanical properties of B4Cp/MWCNT/epoxy multi-scale hybrid composite
Polymers and Polymer Composites · 2021 SCI-Expanded
DOÇENT MUSTAFA TAŞYÜREK →
Experimental investigation, modeling and optimization study on the mechanical properties of Bsub4/sub C subp/sub/MWCNT/epoxy multi-scale hybrid composite/title
POLYMERS POLYMER COMPOSITES · 2020 SCI
DOÇENT MUSTAFA TAŞYÜREK →
Makale Bilgileri
DergiPolymers and Polymer Composites
Yayın TarihiKasım 2021
Cilt / Sayfa29 · 1450-1461
Scopus ID2-s2.0-85096221206
Özet
In this study, process parameters and mechanical properties of the multi-scale composite were investigated experimentally and predictably. Multi-scale material includes boron carbide particles and multi walled carbon nanotubes (MWCNTs) in the epoxy-based matrix. Both reinforcements were reinforced into the matrix with various rates simultaneously. Average three tensile strength and hardness values were determined. The tensile strength and hardness were enhanced thanks to high rate of B4C usage up to 54.09% and 2.54%, respectively. The microstructure of the hybrid composite was investigated by Scanning Electron Microscopy. Also, Fourier Transform Infrared Spectroscopy was used to interpret spectral bands. The experimental data were analyzed using optimization method. Optimal process parameters for tensile strength and interfacial properties were determined. The Analysis of Variance (ANOVA) was used to obtain most significant factor and optimum levels of parameters. Finally, it was observed that B4C ratio is the most dominant factor affecting the mechanical and thermal properties.
Yazarlar (1)
1
Mustafa Tasyurek
ORCID: 0000-0001-9016-8584
Anahtar Kelimeler
B C 4
hybrid nanocomposite
modeling
MWCNT
Taguchi approach
Kurumlar
Selçuk Üniversitesi
Selçuklu Turkey
Metrikler
3
Atıf
1
Yazar
5
Anahtar Kelime