Scopus
YÖKSİS DOI Eşleşti
SJR Q1
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
Composite Structures · Mart 2020
YÖKSİS Kayıtları
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
Composite Structures · 2020 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
YÖKSİS Kayıtları — ISSN Eşleşmesi
An experimental study on low velocity impact performance of bolted composite joints part 1: Influence of halloysite nanotubes on dynamic loading response
2021 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
An experimental study on low velocity impact performance of bolted composite joints-part 2: Influence of long-term seawater aging
2021 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite
2020 ISSN: 0263-8223 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
2020 ISSN: 0263-8223 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite
2019 ISSN: 0263-8223 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
An experimental evaluation on the dynamic response of water aged composite/aluminium adhesive joints: Influence of electrospun nanofibers interleaving
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
A Review on Drilling of FML Stacks with Conventional and Unconventional Processing Methods under Different Conditions
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
A Review on Drilling of FML Stacks with Conventional and Unconventional Processing Methods under Different Conditions
2022 ISSN: 0263-8223 SCI-Expanded Q1
Dr. Öğr. Üyesi MEHMET AKİF DOĞAN →
Effects of high pulling speeds on mechanical properties and morphology of pultruded GFRP composite flat laminates
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Effect of oil pressure upon filament wound basalt/glass fibers hybrid polymer based composite pipes subjected to low velocity impact
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. MEHMET TURAN DEMİRCİ →
Quasi-Static tensile loading performance of Bonded, Bolted, and hybrid Bonded-Bolted Carbon-to-Carbon composite Joints: Effect of recycled polystyrene nanofiber interleaving
2023 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Experimental investigation on Compression-After-Impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring
2023 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Makale Bilgileri
Dergi
Composite Structures
ISSN02638223
Yayın TarihiMart 2020
Cilt / Sayfa235
Scopus ID2-s2.0-85076422131
Özet
In the first part of this two-part study, filament wound hybrid composite pipes with various stacking sequences were manufactured and mechanical properties such as hardness, ring tensile strength, and burst strength were experimentally investigated. After determining mechanical properties, drilling tests were performed to research machinability characteristics. The second part of the study consists damage analysis and surface quality examination including ring test damage analysis, push-out delamination analysis, borehole damage examination and borehole surface quality. The experimental data suggested that cutting parameters, stacking sequence, and the use of back-up were impactful on the formation and propagation of various types of damages. Especially, the effect of stacking sequence was remarkable. A larger delamination area was formed in Glass-Glass-Carbon (GGC) sample after the ring tensile tests compared to Glass-Carbon-Glass (GCG) and Carbon-Glass-Glass (CGG) samples. In all cases, the utilization of back-up lead to decrease of delamination with 9–40% reduction in surface roughness. When the back-up is not used during drilling, an excessive push-out delamination occurred in all drilling tests. Moreover, CGG samples represented lower push out delamination. In addition, position of the hole depending on the winding angle plays a key role on damage formation and surface quality.
Yazarlar (4)
1
Lokman Gemi
2
Sezer Morkavuk
ORCID: 0000-0002-6271-0804
3
Uğur Köklü
4
Şakir Yazman
Anahtar Kelimeler
Composite tubes
Damage analysis
Delamination
Drilling machinability
Hybrid composite pipes
Stacking sequence
Surface quality
Kurumlar
Karamanoğlu Mehmetbey Üniversitesi
Karaman Turkey
Necmettin Erbakan Üniversitesi
Meram Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Composite Structures
Q1
SJR Skoru1,761
H-Index213
YayıncıElsevier B.V.
ÜlkeNetherlands
Ceramics and Composites (Q1)
Civil and Structural Engineering (Q1)
Metrikler
106
Atıf
4
Yazar
7
Anahtar Kelime