Scopus
YÖKSİS DOI Eşleşti
SJR Q1
A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions
Composite Structures · Ekim 2022
YÖKSİS Kayıtları
A Review on Drilling of FML Stacks with Conventional and Unconventional Processing Methods under Different Conditions
Composite Structures · 2022 SCI-Expanded
Dr. Öğr. Üyesi MEHMET AKİF DOĞAN →
A Review on Drilling of FML Stacks with Conventional and Unconventional Processing Methods under Different Conditions
Composite Structures · 2022 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
YÖKSİS Kayıtları — ISSN Eşleşmesi
An experimental study on low velocity impact performance of bolted composite joints part 1: Influence of halloysite nanotubes on dynamic loading response
2021 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
An experimental study on low velocity impact performance of bolted composite joints-part 2: Influence of long-term seawater aging
2021 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite
2020 ISSN: 0263-8223 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
2020 ISSN: 0263-8223 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite
2019 ISSN: 0263-8223 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
An experimental evaluation on the dynamic response of water aged composite/aluminium adhesive joints: Influence of electrospun nanofibers interleaving
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
A Review on Drilling of FML Stacks with Conventional and Unconventional Processing Methods under Different Conditions
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
A Review on Drilling of FML Stacks with Conventional and Unconventional Processing Methods under Different Conditions
2022 ISSN: 0263-8223 SCI-Expanded Q1
Dr. Öğr. Üyesi MEHMET AKİF DOĞAN →
Effects of high pulling speeds on mechanical properties and morphology of pultruded GFRP composite flat laminates
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Effect of oil pressure upon filament wound basalt/glass fibers hybrid polymer based composite pipes subjected to low velocity impact
2022 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. MEHMET TURAN DEMİRCİ →
Quasi-Static tensile loading performance of Bonded, Bolted, and hybrid Bonded-Bolted Carbon-to-Carbon composite Joints: Effect of recycled polystyrene nanofiber interleaving
2023 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Experimental investigation on Compression-After-Impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring
2023 ISSN: 0263-8223 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Makale Bilgileri
Dergi
Composite Structures
ISSN02638223
Yayın TarihiEkim 2022
Cilt / Sayfa297
Scopus ID2-s2.0-85133278595
Özet
Fiber and metal materials used in Fiber Metal Laminate (FML) have different machinability properties due to their different structures. This case has made it a research topic to obtain good hole quality in these materials. A good match between the parameters used is required for the machinability of FML. Traditional and non-traditional machining methods in the machining of FML in this article were investigated and a comprehensive review regarding the machining parameters and hole quality were conducted. Considering the methods and parameters used, the defects occurring in the holes (delamination, hole size and circularity, surface roughness, etc.) were determined and the most suitable processing methods and parameters were picked in order to minimize these defects. As a result, the most suitable machining method and optimum cutting parameters for a better hole quality in FML machinability are determined, and it is aimed that this study will be beneficial to scientific and industrial societies.
Yazarlar (5)
1
Mehmet Akif Doğan
2
Şakir Yazman
3
Lokman Gemi
4
Murat Yildiz
5
Ahmet Yapici
Anahtar Kelimeler
CFRP
Delamination
Drilling
Fiber metal laminates (FML)
GFRP
Hole quality
Machinability
Process parameters
Kurumlar
Iskenderun Technical University
Iskenderun Turkey
Necmettin Erbakan Üniversitesi
Meram Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Composite Structures
Q1
SJR Skoru1,660
H-Index226
YayıncıElsevier B.V.
ÜlkeNetherlands
Ceramics and Composites (Q1)
Civil and Structural Engineering (Q1)
Metrikler
42
Atıf
5
Yazar
8
Anahtar Kelime