Scopus
YÖKSİS DOI Eşleşti
SJR Q1
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
Composites Part A Applied Science and Manufacturing · Nisan 2024
YÖKSİS Kayıtları
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
Composites Part A: Applied Science and Manufacturing · 2024 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
YÖKSİS Kayıtları — ISSN Eşleşmesi
The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings
2023 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: Comparative analysis of atmospheric plasma activation and conventional treatments
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Assessing the fracture and dynamic mechanical performance of CF/PEKK joints bonded with epoxy-based adhesive film for aerospace applications: Impact of thermal and cycling hygrothermal conditions
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Impact damage and low temperature effects on carbon fiber/epoxy joints: A comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates
2025 ISSN: 1359-835X SCI Q1
Doç. Dr. HASAN ULUS →
Analyzing stiffness variations in 3D woven composites: A multi-instrumental study on Glass/Kevlar hybridization effects under tensile and shear loads
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Ameliorating tensile and fracture performance of carbon fiber-epoxy composites via atmospheric plasma activation: Insights into damage modes through in-situ acoustic emission inspection
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Makale Bilgileri
ISSN1359835X
Yayın TarihiNisan 2024
Cilt / Sayfa179
Scopus ID2-s2.0-85182268371
Özet
Filament winding and roll wrapping methods are widely used in the production of composite tubes. While the mechanical behavior of composites produced by different methods may be different, the effects of the damages that occurred while machining composite tubes on the mechanical behavior may also be different. In this study, the effects of drilling-induced damages and hole quality on the tensile and fatigue strength of the filament-wound and roll-wrapped composite tubes were experimentally investigated. Results showed that while the behavior of the filament-wound composite tube under hoop tensile load is better than the roll-wrapped composite tube, the roll-wrapped tube performs better than filament-wound tube under hoop fatigue load. It was also observed that different drilling conditions affect the mechanical behavior of filament-wound tube while it was found that drilling conditions do not have a significant effect on the mechanical behavior of roll-wrapped tube because manufacturing defects are more dominant.
Yazarlar (5)
1
Sezer Morkavuk
ORCID: 0000-0002-6271-0804
2
Kubilay Aslantaş
ORCID: 0000-0003-4558-4516
3
Lokman Gemi
4
Uğur Köklü
5
Şakir Yazman
Anahtar Kelimeler
A: Carbon fibres
B: Fatigue
B: Mechanical properties
E: Machining
Kurumlar
Afyon Kocatepe Üniversitesi
Afyonkarahisar Turkey
Karamanoğlu Mehmetbey Üniversitesi
Karaman Turkey
Necmettin Erbakan Üniversitesi
Meram Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Composites Part A: Applied Science and Manufacturing
Q1
SJR Skoru1,517
H-Index240
YayıncıElsevier Ltd
ÜlkeUnited Kingdom
Ceramics and Composites (Q1)
Mechanics of Materials (Q1)
Metrikler
41
Atıf
5
Yazar
4
Anahtar Kelime