/ Makaleler / Scopus Detay

Scopus YÖKSİS ISSN Eşleşti SJR Q1

A feasibility study using simulation-based optimization and Taguchi experimental design method for material handling-transfer system in the automobile industry

International Journal of Advanced Manufacturing Technology · Mart 2012

YÖKSİS Kayıtları — ISSN Eşleşmesi

Cost optimization of submersible motors using a genetic algorithm and a finite element method

2007 ISSN: 0268-3768 SCI-Expanded

Prof. Dr. MEHMET ÇUNKAŞ →

10.1007/s00170-006-0458-x

Modelling of Dynamic Cutting Force Coefficients and Chatter Stability Dependent on Shear Angle Oscillation

2017 ISSN: 0268-3768 SCI-Expanded

Prof. Dr. SÜLEYMAN NEŞELİ →

A simple approach to analyze process damping in chatter vibration

2014 ISSN: 0268-3768 SCI-Expanded

Prof. Dr. SÜLEYMAN NEŞELİ →

10.1007/s00170-013-5307-0

Failure analysis of support during profile cutting process using horizontal milling machine

2014 ISSN: 0268-3768 SCI-Expanded 1 atıf

Prof. Dr. SÜLEYMAN NEŞELİ →

10.1007/s00170-013-5356-4

A state-of-the-art review on sensors and signal processing systems in mechanical machining processes

2021 ISSN: 0268-3768 SCI-Expanded Q2

Doç. Dr. EMİN SALUR →

10.1007/s00170-021-07425-4

Influence of tool path strategies on machining time, tool wear, and surface roughness during milling of AISI X210Cr12 steel

2022 ISSN: 0268-3768 SCI-Expanded Q2

Dr. Öğr. Üyesi ÜSAME ALİ USCA →

10.1007/s00170-021-08365-9

Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites

2021 ISSN: 0268-3768 SCI-Expanded Q2

Doç. Dr. MUSTAFA KUNTOĞLU →

10.1007/s00170-021-07670-7

Influence of tool path strategies on machining time, tool wear, and surface roughness during milling of AISI X210Cr12 steel

2022 ISSN: 0268-3768 SCI Q2

Doç. Dr. MUSTAFA KUNTOĞLU →

10.1007/s00170-021-08365-9

Indirect monitoring of machining characteristics via advanced sensor systems: a critical review

2022 ISSN: 0268-3768 SCI-Expanded Q2

Doç. Dr. MUSTAFA KUNTOĞLU →

10.1007/s00170-022-09286-x

Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites

2021 ISSN: 0268-3768 SCI-Expanded Q2

Doç. Dr. MUSTAFA KUNTOĞLU →

10.1007/s00170-021-06889-8

A state of the art on surface morphology of selective laser-melted metallic alloys

2023 ISSN: 0268-3768 SCI-Expanded Q2

Dr. Öğr. Üyesi EYÜB CANLI →

10.1007/s00170-023-11534-7

Theoretical and experimental research of edge inclination angle effect on minimum uncut chip thickness in oblique cutting of C45 steel

2022 ISSN: 0268-3768 SCI-Expanded Q2

Doç. Dr. MUSTAFA KUNTOĞLU →

10.1007/s00170-022-10605-5

An investigation of the shearing performance and sheared surface characterisation of ultra-strength DP steel-Al explosive welded plate composite

2023 ISSN: 0268-3768 SCI-Expanded Q2

Prof. Dr. MUSTAFA ACARER →

10.1007/s00170-023-11231-5

Makale Bilgileri

Dergi International Journal of Advanced Manufacturing Technology

ISSN02683768

Yayın TarihiMart 2012

Cilt / Sayfa59 · 433-443

DOI10.1007/s00170-011-3514-0

Scopus ID2-s2.0-84867578616

Özet Nowadays, so as to adapt to the global market, where competition is getting tougher, firms producing through the modern production approach need to bring not the only performance of the system designed both during the research and development phase and the production phase but also the performance of the product to be developed as well as the process to be improved to the highest level. The Taguchi method is an experimental design technique seeking to minimize the effect of uncontrollable factors, using orthogonal arrays. It can also be designed as a set of plans showing the way data are collected through experiments. Experiments are carried out using factors defined at different levels and a solutionmodel generated in ARENA 3.0 program using SIMAN, which is a simulation language. Many experimental investigations reveal that the speed and capacity of automated-guided vehicle, the capacities of local depots, and the mean time between shipping from the main depot are the major influential parameters that affect the performance criteria of the storage system. For the evaluation of experiment results and effects of related factors, variance analysis and signal/noise ratio are used and the experiments are carried out in MINITAB15 according to Taguchi L16 scheme. The purpose of this study is to prove that experimental design is an utilizable method not only for product development and process improvement but it can also be used effectively in the design of material handling-transfer systems and performance optimization of automation technologies, which are to be integrated to the firms. © Springer-Verlag London Limited 2011.