CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus 🔓 Açık Erişim YÖKSİS Eşleşti

Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between y-tzp ceramic and resin cement

Dental Materials Journal · Ocak 2019

YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cement
DENTAL MATERIALS JOURNAL · 2019 SCI-Expanded
PROFESÖR MÜNİR TOLGA YÜCEL →

Makale Bilgileri

DergiDental Materials Journal
Yayın TarihiOcak 2019
Cilt / Sayfa38 · 241-249
Erişim🔓 Açık Erişim
Özet This study examined the surface roughness (Ra) and shear bond strength (SBS) of Yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic after airborne particle abrasion at different pressures and particle sizes, pre- and post-sintering. Ninety specimens, prepared from Y-TZP ceramic blocks (Vita In-Ceram YZ, Vita Zahnfabrik), were divided into nine subgroups: control, and 50 and 110 μm Al2O3 airborne particle abrasion at 3 and 4 bar pressure, before and after sintering, respectively. According to the sintering order, before and after surface treatments, Ra values were measured using a profilometer. SBS to Y-TZP was assessed after thermocycling, using self-adhesive resin cement (Rely X U200, 3M ESPE). Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) were performed on one specimen per group. All surface-treated samples were rougher than the controls. ABS50-4 (50 μm Al2O3 airborne particle abrasion at 4 bar pressure before sintering), ABS110-3, and ABS110-4 showed the highest Ra values, among all cohorts. The controls displayed lower SBS values than the treated groups (p<0.05), which had statistically similar results to each other. Airborne particle abrasion of pre-sintered Y-TZP, followed by sintering, increased the tetragonal structure contents.

Yazarlar (4)

1
Yener Okutan
2
Munir Tolga Yucel
3
Tugce Gezer
4
Mustafa Borga Donmez

Anahtar Kelimeler

Shear bond strength Surface treatment Y-TZP ceramic

Kurumlar

Aydin Adnan Menderes University
Aydin Turkey
Selçuk Üniversitesi
Selçuklu Turkey

Metrikler

24
Atıf
4
Yazar
3
Anahtar Kelime

Sistemimizdeki Yazarlar