Scopus
YÖKSİS DOI Eşleşti
SJR Q2
Comparison of the mechanical and biological properties of self-adhering materials
Journal of Adhesion Science and Technology · Mayıs 2016
YÖKSİS Kayıtları
Comparison of the mechanical and biological properties of self adhering materials
Journal of Adhesion Science and Technology · 2016 SCI-Expanded
Prof. Dr. HAYRİYE ESRA ÜLKER →
Comparison of the mechanical and biological properties of self-adhering materials
Journal of Adhesion Science and Technology · 2016 SCI-Expanded
Doç. Dr. FİRDEVS KAHVECİOĞLU →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Are dentin posts biomechanically intensive A laboratory and FEA study
2014 ISSN: 0169-4243 SSCI
Prof. Dr. OĞUZ ERASLAN →
Does 2 chlorhexidine digluconate cavity disinfectant or sodium fluoride hydroxyethyl methacrylate affect adhesion of universal adhesive to dentin
2015 ISSN: 0169-4243 SSCI
Prof. Dr. ALİ RIZA ÇETİN →
Functionalization of polystyrene and adhesion studies
1997 ISSN: 0169-4243 SCI-Expanded 25 atıf
Prof. Dr. AHMET OKUDAN →
Effects of the functional groups of polystyrene on its adhesion improvement and corrosion resistance
1998 ISSN: 0169-4243 SCI-Expanded 23 atıf
Prof. Dr. AHMET OKUDAN →
Response of exposed human pulp to application of a hemostatic agent and a self etch adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. ÖZGÜR ÖZDEMİR →
Adhesion and corrosion resistance properties of coatings obtained from modified low molecular weight polystyrenes
2006 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AHMET KOÇAK →
Response of exposed human pulp to application of a hemostatic agent and a self etch adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. NEVİN ÇOBANOĞLU →
POLYTETRAFLUOROETYLENE TAPE AS TEMPORARY RESTORATIVEMATERIAL A FLUID FILTRATION STUDY
2015 ISSN: 0169-4243 Endekste taranmıyor
Prof. Dr. SEMA BELLİ →
Which is effective on bond strength of resin based sealers incorporation of powdered dentin to primer or adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
Effect of 2 chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth coloured restorative materials to sound and caries affected dentin
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
The effect of different restoration techniques on fracture strength of teeth with flared roots
2014 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
Functionalization of polystyrene and adhesion studies
1997 ISSN: 0169-4243 SCI-Expanded 24 atıf
Prof. Dr. ERSİN GÜLER →
Effect of intracanal medicaments on the push out bond strength of Biodentine in comparison with Bioaggregate apical plugs
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AYÇE ÜNVERDİ →
Comparison of the mechanical and biological properties of self adhering materials
2016 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. HAYRİYE ESRA ÜLKER →
The effects of water flow rate on shear bond strength of self etch resin cement to dentin surface after Er,Cr:YSGG laser etching
2017 ISSN: 0169-4243 SCI
Prof. Dr. İSA YÖNDEM →
Comparison of the mechanical and biological properties of self-adhering materials
2016 ISSN: 0169-4243 SCI-Expanded Q3
Doç. Dr. FİRDEVS KAHVECİOĞLU →
Residual monomer release from orthodontic adhesives cured with different light sources
2016 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. MURAT SELİM BOTSALI →
Effect of post restoration on stresses in premolars with endodontic periodontal lesion an FEA study
2017 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA HAKKI →
Shear bond strength to enamel and failure type of different periodontal splints :in vivo and in vitro study
2016 ISSN: 0169-4243 SCI-Expanded Q3
Prof. Dr. NİMET ÜNLÜ →
The effects of water flow rate on shear bond strength of self etch resin cement to dentin surface after Er Cr YSGG laser etching
2016 ISSN: 0169-4243 SSCI
Prof. Dr. İSA YÖNDEM →
Makale Bilgileri
ISSN01694243
Yayın TarihiMayıs 2016
Cilt / Sayfa30 · 1119-1130
Scopus ID2-s2.0-84959482206
Özet
Purpose: The purpose of the present study was to compare the Vickers hardness numbers (VHNs), roughness numbers (RNs) and biological compatibility of glass carbomer (Glass Fill), resin-modified glass ionomer (Fuji II LC) and self-adhering flowable composite (Vertise Flow) materials. Materials and methods: Disc-shaped specimens of test materials (n = 15/group) were prepared, and VHNs and RNs were determined after 24 h. A direct contact test was used for cytotoxicity evaluation. Cell viability was measured for 24 h post-exposition with a photometric test (MTT assay; n = 16). Data were analysed using one-way analysis of variance with a post hoc Tukeys test, the Kruskal-Wallis test and the Mann-Whitney U-test (p < 0.05). Results: Fuji II LC had the highest VHN. The VHN of Fuji II LC differed significantly from those of the other materials (p < 0.05). The RNs of Fuji II and Glass Fill were higher than that of Vertise Flow (p < 0.05). The self-adhering materials were not significantly cytotoxic compared with the control group (p > 0.05). Conclusions: The materials tested in this study showed a similar lack of cytotoxicity. The VHN of Fuji II LC was the highest, and the RN of Vertise Flow was the lowest.
Yazarlar (5)
1
H. E. Ülker
2
A. Erkan
3
Nuray Günaydin
4
Firdevs Kahvecioʇlu
5
Mustafa Ulker
Anahtar Kelimeler
Roughness and cytotoxicity
Self-adhering materials
Vickers microhardness
Kurumlar
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Journal of Adhesion Science and Technology
Q2
SJR Skoru0,548
H-Index92
YayıncıTaylor and Francis Ltd.
ÜlkeUnited Kingdom
Chemistry (miscellaneous) (Q2)
Materials Chemistry (Q2)
Mechanics of Materials (Q2)
Surfaces and Interfaces (Q2)
Surfaces, Coatings and Films (Q2)
Metrikler
4
Atıf
5
Yazar
3
Anahtar Kelime