Scopus
YÖKSİS DOI Eşleşti
SJR Q2
The Microstructure and Mechanical Properties of Friction Welded Cast Ni3Al Intermetallic Alloy
Transactions of the Indian Institute of Metals · Mart 2018
YÖKSİS Kayıtları
The Microstructure and Mechanical Properties of Friction Welded Cast Ni3Al Intermetallic Alloy
Transactions of the Indian Institute of Metals SCI-Expanded
Dr. Öğr. Üyesi GÖKHAN ARICI →
The Microstructure and Mechanical Properties of Friction Welded Cast Ni3Al Intermetallic Alloy
Transactions of the Indian Institute of Metals · 2018 SCI-Expanded
Dr. Öğr. Üyesi GÖKHAN ARICI →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Effect of Austempering Temperature and Mn/Ni/Mo Modification on Microstructure and Mechanical Properties of Ductile Cast Iron
2026 ISSN: 0972-2815 SCI-Expanded Q3
Dr. Öğr. Üyesi FİKRET KABAKCI →
The Microstructure and Mechanical Properties of Friction Welded Cast Ni3Al Intermetallic Alloy
2018 ISSN: 0972-2815 SCI-Expanded
Dr. Öğr. Üyesi GÖKHAN ARICI →
The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites
2021 ISSN: 0972-2815 SCI-Expanded Q3
Doç. Dr. EMİN SALUR →
Makale Bilgileri
ISSN09722815
Yayın TarihiMart 2018
Cilt / Sayfa71 · 775-779
Scopus ID2-s2.0-84966480818
Özet
Ni3Al alloy was bonded with itself by friction welding. Various friction speeds, friction durations and friction pressures were tested to find optimum friction welding parameters, and the effects of the welding parameters on the welding interface, microstructure and mechanical properties were investigated. SEM and optical microscopy were carried out to examine the microstructural variations of the welding interfaces. Also, the microhardness distribution across the interface was evaluated considering the microstructural variations. In addition, the shear strengths of welded parts were measured. It was observed that the shear strengths of welds were dependent on welding time, friction pressure and friction speed. The maximum shear strength was found as 354 MPa.
Yazarlar (5)
1
Ibrahim Celikyürek
2
Bedri Baksan
3
Osman Torun
4
Gökhan Arici
5
Akın Özcan
Anahtar Kelimeler
Electron microscopy
Friction welding
Interfaces
Intermetallic
X-ray diffraction
Kurumlar
Afyon Kocatepe Üniversitesi
Afyonkarahisar Turkey
Eskişehir Osmangazi Üniversitesi
Eskisehir Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Transactions of the Indian Institute of Metals
Q2
SJR Skoru0,365
H-Index53
YayıncıSpringer
ÜlkeIndia
Metals and Alloys (Q2)
Metrikler
1
Atıf
5
Yazar
5
Anahtar Kelime