Scopus
YÖKSİS DOI Eşleşti
SJR Q2
Effect of femtosecond laser beam angle and formed shape on surface roughness and shear bond strength between zirconia and resin cement
Journal of Adhesion Science and Technology · Haziran 2018
YÖKSİS Kayıtları
Effect of femtosecond laser beam angle and formed shape on surface roughness and shear bond strength between zirconia and resin cement
Journal of Adhesion Science and Technology · 2017 SCI
Prof. Dr. MÜNİR TOLGA YÜCEL →
Effect of femtosecond laser beam angle and formed shape on surface roughness and shear bond strength between zirconia and resin cement
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY · 2018 SCI-Expanded
Prof. Dr. MÜNİR TOLGA YÜCEL →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Are dentin posts biomechanically intensive A laboratory and FEA study
2014 ISSN: 0169-4243 SSCI
Prof. Dr. OĞUZ ERASLAN →
Does 2 chlorhexidine digluconate cavity disinfectant or sodium fluoride hydroxyethyl methacrylate affect adhesion of universal adhesive to dentin
2015 ISSN: 0169-4243 SSCI
Prof. Dr. ALİ RIZA ÇETİN →
Functionalization of polystyrene and adhesion studies
1997 ISSN: 0169-4243 SCI-Expanded 25 atıf
Prof. Dr. AHMET OKUDAN →
Effects of the functional groups of polystyrene on its adhesion improvement and corrosion resistance
1998 ISSN: 0169-4243 SCI-Expanded 23 atıf
Prof. Dr. AHMET OKUDAN →
Response of exposed human pulp to application of a hemostatic agent and a self etch adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. ÖZGÜR ÖZDEMİR →
Adhesion and corrosion resistance properties of coatings obtained from modified low molecular weight polystyrenes
2006 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AHMET KOÇAK →
Response of exposed human pulp to application of a hemostatic agent and a self etch adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. NEVİN ÇOBANOĞLU →
POLYTETRAFLUOROETYLENE TAPE AS TEMPORARY RESTORATIVEMATERIAL A FLUID FILTRATION STUDY
2015 ISSN: 0169-4243 Endekste taranmıyor
Prof. Dr. SEMA BELLİ →
Which is effective on bond strength of resin based sealers incorporation of powdered dentin to primer or adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
Effect of 2 chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth coloured restorative materials to sound and caries affected dentin
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
The effect of different restoration techniques on fracture strength of teeth with flared roots
2014 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
Functionalization of polystyrene and adhesion studies
1997 ISSN: 0169-4243 SCI-Expanded 24 atıf
Prof. Dr. ERSİN GÜLER →
Effect of intracanal medicaments on the push out bond strength of Biodentine in comparison with Bioaggregate apical plugs
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AYÇE ÜNVERDİ →
Comparison of the mechanical and biological properties of self adhering materials
2016 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. HAYRİYE ESRA ÜLKER →
The effects of water flow rate on shear bond strength of self etch resin cement to dentin surface after Er,Cr:YSGG laser etching
2017 ISSN: 0169-4243 SCI
Prof. Dr. İSA YÖNDEM →
Comparison of the mechanical and biological properties of self-adhering materials
2016 ISSN: 0169-4243 SCI-Expanded Q3
Doç. Dr. FİRDEVS KAHVECİOĞLU →
Residual monomer release from orthodontic adhesives cured with different light sources
2016 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. MURAT SELİM BOTSALI →
Effect of post restoration on stresses in premolars with endodontic periodontal lesion an FEA study
2017 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA HAKKI →
Shear bond strength to enamel and failure type of different periodontal splints :in vivo and in vitro study
2016 ISSN: 0169-4243 SCI-Expanded Q3
Prof. Dr. NİMET ÜNLÜ →
The effects of water flow rate on shear bond strength of self etch resin cement to dentin surface after Er Cr YSGG laser etching
2016 ISSN: 0169-4243 SSCI
Prof. Dr. İSA YÖNDEM →
Makale Bilgileri
ISSN01694243
Yayın TarihiHaziran 2018
Cilt / Sayfa32 · 1265-1277
Scopus ID2-s2.0-85038033481
Özet
Achieving adhesion between resin cement and zirconia requires pretreatment of the surface. This in vitro study aimed to evaluate the effect of femtosecond laser beam angle and the shape of the formed surfaces, on the roughness and shear bond strength (SBS) of resin cement to zirconia ceramic. Seventy Y-TZP ceramic specimens were divided into seven groups (n = 10). A femtosecond laser irradiation was performed on the ceramic surface of three shapes (spiral (SP), square (SQ) and circular (CI) and at two angles (30 and 90°) to give SP-30, SQ-30 and CI-30 and SP-90, SQ-90 and CI-90, respectively. After treatment, the surface roughness of all specimens was evaluated using a profilometer. One specimen from each group was analysed using a scanning electron microscope. The bonded specimens were thermocycled 5000 times and then an SBS test was performed. Kruskal-Wallis and Mann-Whitney U tests were used to analyse surface roughness and SBS values. The control group had statistically lower surface roughness (Ra) values than the treated groups (p < 0.05). SP-30 and SQ-30 laser treated specimens showed higher Ra values than the other specimens. Statistically significant SBS values (p = 0.000) were observed between the groups. All laser treated samples showed greater SBS compared to the control group. SP-30, SQ-30 and SQ-90 groups showed the highest SBS values. Within the limitations of this experimental study, the highest mean values for Ra and SBS were achieved with SP and SQ surfaces using a 30° angle laser beam.
Yazarlar (5)
1
Munir Tolga Yucel
2
Ismail Kilic
3
Hamdi Şükür Kılıç
4
Yasemin Gündoğdu
5
Yener Okutan
Anahtar Kelimeler
Femtosecond laser
shear bond strength
surface roughness
zirconia
Kurumlar
Aydin Adnan Menderes University
Aydin Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Journal of Adhesion Science and Technology
Q2
SJR Skoru0,533
H-Index86
YayıncıTaylor and Francis Ltd.
ÜlkeUnited Kingdom
Chemistry (miscellaneous) (Q2)
Materials Chemistry (Q2)
Mechanics of Materials (Q2)
Surfaces and Interfaces (Q2)
Surfaces, Coatings and Films (Q2)
Metrikler
18
Atıf
5
Yazar
4
Anahtar Kelime