Scopus
YÖKSİS DOI Eşleşti
SJR Q1
Investigation of the tensile properties of continuous steel wire-reinforced gray cast iron composite
Materials Science and Engineering A · Nisan 2011
YÖKSİS Kayıtları
Investigation of the tensile properties of continuous steel wire reinforced gray cast iron composite
Materials Science and Engineering: A · 2011 SCI
Prof. Dr. RECAİ KUŞ →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Impact toughness and microstructure of continuous steel wire reinforced cast iron composite
2009 ISSN: 09215093 SCI 9 atıf
Prof. Dr. RECAİ KUŞ →
Investigation of the tensile properties of continuous steel wire reinforced gray cast iron composite
2011 ISSN: 09215093 SCI
Prof. Dr. RECAİ KUŞ →
Impact toughness and microstructure of continuous steel wire reinforced cast iron composite
2009 ISSN: 0921-5093 SCI-Expanded
Prof. Dr. RECAİ KUŞ →
Investigation of the tensile properties of continuous steel wire reinforced gray cast iron composite
2011 ISSN: 0921-5093 SCI-Expanded
Prof. Dr. RECAİ KUŞ →
Microstructure\u2013property relationship in explosively welded duplex stainless steel\u2013steel
2003 ISSN: 0921-5093 SCI
Prof. Dr. MUSTAFA ACARER →
Makale Bilgileri
ISSN09215093
Yayın TarihiNisan 2011
Cilt / Sayfa528 · 3897-3904
Scopus ID2-s2.0-79952283244
Özet
The aim of the present study was to improve the tensile properties of gray cast iron by reinforcing the material with a steel wire. The composite was produced by sand mold casting, and the specimens were normalized by applying heat treatments at 800 °C, 850 °C, and 900 °C. Tension tests were conducted on gray cast iron and composite specimens, and the microstructure of the specimens was examined with an optical microscope. The fracture surface of the tension test specimens was examined with a scanning electron microscope (SEM), and graphite-free transition regions with high degrees of hardness were observed due to the diffusion of carbon from the cast iron to the steel wire. The microstructure of the transition region (fine pearlitic phase with partially dissolved graphite flakes) and the bond quality in the transition region increased the tensile properties of cast iron composites. Also, it is concluded that the tensile properties of gray cast iron increased with an increase in the normalization temperature. © 2011 Elsevier B.V.
Yazarlar (3)
1
Ahmet Akdemir
2
Recai Kuş
ORCID: 0000-0002-7705-7924
3
Mehmet Şimşir
Anahtar Kelimeler
Composite
Fractography
Gray cast iron
Heat treatment
Mechanical properties
Microstructure
Kurumlar
Cumhuriyet Üniversitesi
Sivas Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Materials Science and Engineering: A
Q1
SJR Skoru1,830
H-Index306
YayıncıElsevier Ltd
ÜlkeUnited Kingdom
Condensed Matter Physics (Q1)
Materials Science (miscellaneous) (Q1)
Mechanical Engineering (Q1)
Mechanics of Materials (Q1)
Nanoscience and Nanotechnology (Q1)
Metrikler
22
Atıf
3
Yazar
6
Anahtar Kelime