Scopus
🔓 Açık Erişim YÖKSİS DOI Eşleşti
SJR Q1
Determination of Temperature Effects on Cortical Bone Milling Using Taguchi Method
Arabian Journal for Science and Engineering · Ocak 2025
YÖKSİS Kayıtları
Determination of Temperature Effects on Cortical Bone Milling Using Taguchi Method
Arabian Journal for Science and Engineering · 2025 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
YÖKSİS Kayıtları — ISSN Eşleşmesi
New WOA Variants for Superior Meta-heuristic Optimization with Multiple Hunter Whale Leading
2025 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi SEMA SERVİ →
A New Lifetime Model: Properties, Estimation, and Applications in Quality Control
2025 ISSN: 2193-567X SCI-Expanded Q2
Arş. Gör. ERDEM CANKUT →
Brain Tumor Detection with Transfer Learning Models Based on Attention Modules
2026 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi ZÜLEYHA YILMAZ ACAR →
Effect of Silica/Graphene Nanohybrid Particles on the Mechanical Properties of Epoxy Coatings
2019 ISSN: 2193-567X SCI-Expanded Q3
Doç. Dr. ŞAKİR YAZMAN →
Heuristic Optimization Based on Penalty Approach for Surface Permanent Magnet Synchronous Machines
2020 ISSN: 2193-567X SCI-Expanded Q1
Doç. Dr. MEHMET AKİF ŞAHMAN →
A Method of Classification Performance Improvement Via a Strategy of Clustering-Based Data Elimination Integrated with k-Fold Cross-Validation
2021 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi ONUR İNAN →
Training Feed-Forward Multi-Layer Perceptron Artificial Neural Networks with a Tree-Seed Algorithm
2020 ISSN: 2193-567X SCI-Expanded Q3
Doç. Dr. AHMET CEVAHİR ÇINAR →
Solving Multi‑Objective Resource Allocation Problem Using Multi‑Objective Binary Artificial Bee Colony Algorithm
2021 ISSN: 2193-567X SCI-Expanded Q3
Prof. Dr. FATİH BAŞÇİFTÇİ →
Theoretical and Experimental Investigation of the Performance of an Atkinson Cycle Engine
2021 ISSN: 2193-567X SCI-Expanded Q3
Dr. Öğr. Üyesi HALİL ERDİ GÜLCAN →
Optimization of Electricity Generation Parameters with Microbial Fuel Cell Using the Response Surface Method
2022 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. ŞAKİR TAŞDEMİR →
The Innovative Approach to Real-Time Detection of Fuel Types Based on Ultrasonic Sensor and Machine Learning
2024 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. MEHMET ÇUNKAŞ →
Enhanced Gain Dual-Port Compact Printed Meandered Log-Periodic Monopole Array Antenna Design with Octagonal-Ring Shaped FSS for Broadband 28 GHz Applications
2024 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi MEHMET YERLİKAYA →
The Innovative Approach to Real-Time Detection of Fuel Types Based on Ultrasonic Sensor and Machine Learning
2024 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi UĞUR TAŞKIRAN →
Determination of Temperature Effects on Cortical Bone Milling Using Taguchi Method
2025 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. SÜLEYMAN NEŞELİ →
Characterizing Machining Indicators with Machine Learning Models Under Cellulose Nanocrystal and Graphene-Based Nanofluid Conditions
2025 ISSN: 2193-567X SCI-Expanded Q2
Doç. Dr. MUSTAFA KUNTOĞLU →
Makale Bilgileri
ISSN2193567X
Yayın TarihiOcak 2025
Scopus ID2-s2.0-105001036378
Erişim🔓 Açık Erişim
Özet
In medical applications, minimizing thermal damage to biological tissue is of utmost importance for cell viability. In this experimental study, the effects of processing parameters on temperature variation during milling of cortical bone were investigated. Using the Taguchi method, optimization of parameters was performed to identify combinations that minimize the thermal rise, thus reducing the risk of necrosis and at the same time preserving bone viability. The effect of cutting tool rotational speed, feed rate, depth of cut and tool geometry on temperature changes in cortical bone samples was analyzed. Bovine femoral cortical bone samples were subjected to controlled milling trials in which temperature changes near the cutting interface were recorded in real time using a camera with a sensitive thermal sensor. Analysis of variance (ANOVA) was used to determine the statistical significance of the effect of parameters on temperature rise. The findings of the study show that there are significant interactions between the machining parameters affecting the thermal response. Statistical analysis showed that the depth of cut was the most important factor on cortical bone processing temperature, contributing 52.1% in reducing temperature values. It is followed by the number of cutting tool teeth with 23.77% and rotational speed with 18.59%. The optimal machining conditions that minimize thermal damage identified by the study provide effective baseline information for safer and more efficient bone milling procedures.
Yazarlar (2)
1
Yusuf Caglar Kagitci
ORCID: 0000-0002-6544-5284
2
Süleyman Neşeli
Anahtar Kelimeler
ANOVA
Cortical bone
Milling
Taguchi
Temperature
Kurumlar
Konya Technical University
Konya Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Arabian Journal for Science and Engineering
Q1
SJR Skoru0,545
H-Index89
ÜlkeGermany
Multidisciplinary (Q1)
Metrikler
1
Atıf
2
Yazar
5
Anahtar Kelime