Scopus
🔓 Açık Erişim YÖKSİS Eşleşti
Evaluation of Model and Process Optimization for the Treatment of Drilling Wastewater Using Electrocoagulation
Molecules · Mart 2025
YÖKSİS Kayıtları
Evaluation of Model and Process Optimization for the Treatment of Drilling Wastewater Using Electrocoagulation
Molecules · 2025 SCI-Expanded
PROFESÖR MUHAMMED KAMİL ÖDEN →
Makale Bilgileri
DergiMolecules
Yayın TarihiMart 2025
Cilt / Sayfa30
Scopus ID2-s2.0-86000670008
Erişim🔓 Açık Erişim
Özet
The extraction of underground resources has accelerated globally, in response to the demands of advancing technology and the rapidly growing population. The increase in drilling activities has caused an increase in environmental pollution problems caused by waste generated during drilling activities, namely drilling sludge and drilling wastewater. In this study, the treatability of wastewater generated during drilling operations in a basin, where an underground gas storage area was created, was investigated using an electrocoagulation (EC) process, using different electrode pairs. The removal efficiencies of the pollution parameters were determined using the response surface method. The wastewater parameters included different organic and inorganic pollutants, such as sodium, chloride, magnesium, and chemical oxygen demand (COD). The concentrations of sodium, chloride, and COD in drilling industry wastewater were found to be very high, at 128,567, 185,292, and 7500 mg/L, respectively. The data obtained in this study yielded a removal efficiency of approximately 65% and above. Sodium achieved the highest pollutant removal efficiency of 85% and above. The statistical values were interpreted for all the pollutants and the suitability of second-degree regression was observed.
Yazarlar (1)
1
Muhammed Kamil Öden
Anahtar Kelimeler
drilling wastewater
electrocoagulation
Fe–Cu electrode
response surface method
wastewater treatment
Kurumlar
Selçuk Üniversitesi
Selçuklu Turkey
Metrikler
3
Atıf
1
Yazar
5
Anahtar Kelime