CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus YÖKSİS DOI Eşleşti SJR Q1

A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes

Composites Part B Engineering · Haziran 2025

YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes
Composites Part B: Engineering · 2025 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
YÖKSİS ISSN Eşleşmesi

Bu dergide (ISSN eşleşmesi) kurumun 15 kaydı bulundu.

YÖKSİS Kayıtları — ISSN Eşleşmesi
Fracture toughness of filament wound BFR and GFR arc shaped specimens with Charpy impact test method
2014 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. MEHMET TURAN DEMİRCİ →
Evaluating the effectiveness of nanofillers in filament wound carbon/epoxy multiscale composite pipes
2016 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Fracture toughness (Mode I) characterization of SiO 2 nanoparticle filled basalt/epoxy filament wound composite ring with split-disk test method
2017 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. MEHMET TURAN DEMİRCİ →
Enhanced fatigue behavior under internal pressure of CNT reinforced filament wound cracked pipes
2017 ISSN: 13598368 SCI Q1
Doç. Dr. MUSTAFA TAŞYÜREK →
Static and dynamic mechanical responses of CaCO3 nanoparticle modified epoxy/carbon fiber nanocomposites
2018 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests
2020 ISSN: 1359-8368 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
Fracture toughness (Mode I) characterization of SiO 2 nanoparticle filled basalt/epoxy filament wound composite ring with split-disk test method
2017 ISSN: 1359-8368 SSCI Q1
Dr. Öğr. Üyesi İBRAHİM DEMİRCİ →
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
2019 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. MUSTAFA KUNTOĞLU →
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
2019 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. EMİN SALUR →
Effect of particle size and replacement ratio on mechanical performance of cementitious mortar containing ground recycled acrylonitrile butadiene styrene (GRABS) waste plastics
2025 ISSN: 1359-8368 SCI-Expanded
Doç. Dr. HASAN ULUS →
A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes
2025 ISSN: 1359-8368 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
Investigation of the stacking sequence and cutting parameters effect on hole morphology in hybrid FML composites
2025 ISSN: 1359-8368 SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Investigation of the stacking sequence and cutting parameters effect on hole morphology in hybrid FML composites
2025 ISSN: 1359-8368 SCI-Expanded Q1
Dr. Öğr. Üyesi MEHMET AKİF DOĞAN →
Comprehensive Evaluation of Tensile Properties, Damage Mechanisms, and Predictive Modeling of Pultruded GFRP After Elevated Temperatures
2025 ISSN: 1359-8368 SCI-Expanded
Doç. Dr. ŞAKİR YAZMAN →
Evaluating the Influence of Service Conditions on the Out-of-Plane and In-Plane Loading Performance and Damage Behavior of Unidirectional CF/PEKK Composites for Aerospace Applications
2025 ISSN: 1359-8368 SCI
Doç. Dr. HASAN ULUS →

Makale Bilgileri

Dergi Composites Part B Engineering
ISSN13598368
Yayın TarihiHaziran 2025
Cilt / Sayfa299
DOI10.1016/j.compositesb.2025.112405
Scopus ID2-s2.0-105000281033
Özet In composite materials, stacking of layers at different angles and changes in stacking sequence significantly affect not only the mechanical behavior but also the machinability characteristic of the composite structure. Therefore, the variation in stacking sequence represents a recent and important research topic in fiber-reinforced plastics. The objective of this study was to investigate the mechanical properties and drilling machinability characteristics of BFRP composite pipes in three different stackings: [±30/±60/±90]3, [±60/±90/±30]3 and [±90/±30/±60]3. The experimental results demonstrate that the stacking sequence has a significant effect on the mechanical behavior and drilling-induced damage formation. It is determined that the [±90/±30/±60]3 sample provided the highest performance in terms of mechanical properties but increased the thrust force during drilling. Furthermore, it is observed that the positioning of the ±90 layer has a considerable impact on both the mechanical and machinability outputs.

Yazarlar (5)

1
Furkan Erhan
2
Lokman Gemi
3
Şakir Yazman
4
Sezer Morkavuk
ORCID: 0000-0002-6271-0804
5
Uğur Köklü

Anahtar Kelimeler

Basalt composite tubes Delamination Drilling Stacking sequence Winding angle

Kurumlar

Karamanoğlu Mehmetbey Üniversitesi
Karaman Turkey
Necmettin Erbakan Üniversitesi
Meram Turkey
Recep Tayyip Erdogan University
Rize Turkey
Selçuk Üniversitesi
Selçuklu Turkey
Scimago Dergi (ISSN Eşleşmesi)
Composites Part B: Engineering
Q1
SJR Skoru2,592
H-Index248
YayıncıElsevier Ltd
ÜlkeUnited Kingdom
Ceramics and Composites (Q1)
Industrial and Manufacturing Engineering (Q1)
Mechanical Engineering (Q1)
Mechanics of Materials (Q1)
Dergi sayfasına git

Metrikler

26
Atıf
5
Yazar
5
Anahtar Kelime

Sistemimizdeki Yazarlar

ŞY
ŞAKİR YAZMAN
Doç. Dr.

Hızlı Erişim

DOI ile aç Scopus'ta aç Makaleler listesi