CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus YÖKSİS DOI Eşleşti SJR Q1

Impact damage and low temperature effects on carbon fiber/epoxy joints: A comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates

Composites Part A Applied Science and Manufacturing · Mart 2025

YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
Impact damage and low temperature effects on carbon fiber/epoxy joints: A comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates
Composites Part A: Applied Science and Manufacturing · 2025 SCI
Doç. Dr. HASAN ULUS →
YÖKSİS ISSN Eşleşmesi

Bu dergide (ISSN eşleşmesi) kurumun 8 kaydı bulundu.

YÖKSİS Kayıtları — ISSN Eşleşmesi
The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings
2023 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: Comparative analysis of atmospheric plasma activation and conventional treatments
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. HASAN ULUS →
Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis
2024 ISSN: 1359-835X SCI-Expanded Q1
Doç. Dr. ŞAKİR YAZMAN →
Assessing the fracture and dynamic mechanical performance of CF/PEKK joints bonded with epoxy-based adhesive film for aerospace applications: Impact of thermal and cycling hygrothermal conditions
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Impact damage and low temperature effects on carbon fiber/epoxy joints: A comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates
2025 ISSN: 1359-835X SCI Q1
Doç. Dr. HASAN ULUS →
Analyzing stiffness variations in 3D woven composites: A multi-instrumental study on Glass/Kevlar hybridization effects under tensile and shear loads
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →
Ameliorating tensile and fracture performance of carbon fiber-epoxy composites via atmospheric plasma activation: Insights into damage modes through in-situ acoustic emission inspection
2025 ISSN: 1359-835X SCI
Doç. Dr. HASAN ULUS →

Makale Bilgileri

Dergi Composites Part A Applied Science and Manufacturing
ISSN1359835X
Yayın TarihiMart 2025
Cilt / Sayfa190
DOI10.1016/j.compositesa.2024.108677
Scopus ID2-s2.0-85213024991
Özet This study investigates the tensile and tensile after impact (TAI) performance of hybrid bolted/bonded (HBB) and only bolted (OB) carbon fiber/epoxy composite joints with cross-ply (CP) and angle-ply (AP) stacking sequences under low-temperature (LT) conditions. The focus is on the behavior of these joints under low temperatures with barely visible impact damage (BVID), relevant to aerospace and high-performance industries. In situ acoustic emission (AE) analysis and fractographic examinations synergistically evaluate the effects of LT (−55 °C) and BVID (10 J energy level) on these joints. Results indicate that HBB-CP intact joints exhibit higher load-bearing capacity at LT due to increased adhesive and matrix stiffness but demonstrate more brittle responses. The combined impact of low temperature and impact loading significantly affects impacted CP joints, leading to notable damage and reduced load-bearing capacity. Although HBB-CP joints are more susceptible to BVID than OB-CP joints, they still outperform overall. AE and fractographic analyses reveal fiber-related failures in CP laminates and matrix/interface failures in AP laminates, with increased matrix cracking at low temperatures. This research provides a comprehensive analysis of the interplay between impact dynamics, temperature variations, and stacking sequence configurations on hybrid and bolted composite joints.

Yazarlar (5)

1
Mahsa Seyednourani
2
Sercan Akgun
3
Hasan Ulus
ORCID: 0000-0001-8591-8993
4
Mehmet Yildiz
ORCID: 0000-0003-1626-5858
5
Hatice S. Sas

Anahtar Kelimeler

Acoustic emission inspection Hybrid bonded/bolted joint Impact damage Low-temperature

Kurumlar

Center for Composite Materials
Newark United States
Sabancı Üniversitesi
Tuzla Turkey
Selçuk Üniversitesi
Selçuklu Turkey
The University of Sheffield
Sheffield United Kingdom
Scimago Dergi (ISSN Eşleşmesi)
Composites Part A: Applied Science and Manufacturing
Q1
SJR Skoru1,517
H-Index240
YayıncıElsevier Ltd
ÜlkeUnited Kingdom
Ceramics and Composites (Q1)
Mechanics of Materials (Q1)
Dergi sayfasına git

Metrikler

55
Atıf
5
Yazar
4
Anahtar Kelime

Sistemimizdeki Yazarlar

HU
HASAN ULUS
Doç. Dr.

Hızlı Erişim

DOI ile aç Scopus'ta aç Makaleler listesi