Scopus
YÖKSİS ISSN Eşleşti
SJR Q1
Analysis of effect factors on thermoelectric generator using Taguchi method
Measurement Journal of the International Measurement Confederation · Ocak 2020
YÖKSİS Kayıtları — ISSN Eşleşmesi
Optimisation of parameters affecting surface roughness of Co28Cr6Mo medical material during CNC lathe machining by using the Taguchi and RSM methods
2016 ISSN: 02632241 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
Classification of vertebral column disorders and lumbar discs disease using attribute weighting algorithm with mean shift clustering
2016 ISSN: 02632241 SCI-Expanded
Prof. Dr. HASAN ERDİNÇ KOÇER →
Point cloud filtering on UAV based point cloud
2019 ISSN: 0263-2241 SCI-Expanded Q1
Doç. Dr. MUSTAFA ZEYBEK →
Investigation of progressive tool wear for determining of optimized machining parameters in turning
2019 ISSN: 0263-2241 SCI-Expanded Q1
Doç. Dr. MUSTAFA KUNTOĞLU →
Analysis of effect factors on thermoelectric generator using Taguchi method
2020 ISSN: 0263-2241 SCI
Dr. Öğr. Üyesi HAKAN TERZİOĞLU →
Decomposition of process damping ratios and verification of process damping model for chatter vibration
2012 ISSN: 02632241 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis
2012 ISSN: 02632241 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
Optimization of tool geometry parameters for turning operations based on the response surface methodology
2011 ISSN: 02632241 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
A new process damping model for chatter vibration
2011 ISSN: 02632241 SCI-Expanded
Prof. Dr. SÜLEYMAN NEŞELİ →
Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
2021 ISSN: 0263-2241 SCI-Expanded Q1
Doç. Dr. MUSTAFA KUNTOĞLU →
The determination of age and gender by implementing new image processing methods and measurements to dental X-ray images
2020 ISSN: 0263-2241 SCI-Expanded
Prof. Dr. FATİH BAŞÇİFTÇİ →
Extraction of forest inventory parameters using handheld mobile laser scanning: A case study from Trabzon, Turkey
2021 ISSN: 0263-2241 SCI-Expanded Q1
Doç. Dr. MUSTAFA ZEYBEK →
Measuring curvature of trajectory traced by coupler of an optimal four-link spherical mechanism
2021 ISSN: 0263-2241 SCI-Expanded Q1
Dr. Öğr. Üyesi OSMAN ACAR →
A CNN-SVM Study Based on Selected Deep Features for Grapevine Leaves Classification
2022 ISSN: 0263-2241 SCI-Expanded Q1
Doç. Dr. MURAT KÖKLÜ →
An S-band zero-IF SFCW through-the-wall radar for range, respiration rate, and DOA estimation
2021 ISSN: 0263-2241 SCI-Expanded Q1
Prof. Dr. İSMAİL SARITAŞ →
An experimental study: Detecting the respiration rates of multiple stationary human targets by stepped frequency continuous wave radar
2021 ISSN: 0263-2241 SCI-Expanded Q1
Prof. Dr. İSMAİL SARITAŞ →
An experimental study: Detecting the respiration rates of multiple stationary human targets by stepped frequency continuous wave radar
2021 ISSN: 0263-2241 SCI-Expanded Q1
Dr. Öğr. Üyesi YUNUS EMRE ACAR →
An S-band zero-IF SFCW through-the-wall radar for range, respiration rate, and DOA estimation
2021 ISSN: 0263-2241 SCI-Expanded Q1
Dr. Öğr. Üyesi YUNUS EMRE ACAR →
A CNN-SVM study based on selected deep features for grapevine leaves classification
2022 ISSN: 0263-2241 SCI-Expanded Q1
Doç. Dr. İLKER ALİ ÖZKAN →
Advance monitoring of hole machining operations via intelligent measurement systems: A critical review and future trends
2022 ISSN: 0263-2241 SCI-Expanded Q1
Dr. Öğr. Üyesi ÜSAME ALİ USCA →
Makale Bilgileri
ISSN02632241
Yayın TarihiOcak 2020
Cilt / Sayfa149
Scopus ID2-s2.0-85071570891
Özet
Due to technological developments in recent years, the need for domestic and industrial electric power is increasing day by day. Alternative energy resources have become more important to reduce production costs by converting waste energy into electricity. In this study, a research was carried out to increase the efficiency and on the factors which were effective in Thermoelectric Generators (TEG) used in the production of electrical energy by using thermal sources from alternative energy sources. In this study, the effects of heat transfer performance of the materials (copper, aluminum and brass) on which thermal water is carried, and the effects of water pressure and velocity on the performance of TEGs were investigated. Taguchi method was used to determine the performance effects in the most accurate way. Taguchi method used three levels with three factors: material (copper, aluminum and brass), engine speed (I, II and III) and water pressure (1-2.5-3.5 bar). In addition, in the Taguchi method, the orthogonal array was used and the optimum operation time was significantly reduced. In this study, TEG1-12706 and TEG1-12710 were performed in 2 different TEGs. 27 experiments were carried out for each TEG under different materials, speed and pressure of water with the experiment set up in this study. When the test results were analyzed by Taguchi method, it was determined that the material was the most important factor in determining the output power and efficiency in the production of electrical energy by using TEG (approx. 89%) and it was seen that the pressure and engine speed had almost no role.
Yazarlar (1)
1
Hakan Terzioğlu
Anahtar Kelimeler
Output power and efficiency
Taguchi method
Thermoelectric generators
Kurumlar
Konya Technical University
Konya Turkey
Scimago Dergi (ISSN Eşleşmesi)
Measurement: Journal of the International Measurement Confederation
Q1
SJR Skoru1,244
H-Index146
YayıncıElsevier B.V.
ÜlkeNetherlands
Applied Mathematics (Q1)
Condensed Matter Physics (Q1)
Education (Q1)
Electrical and Electronic Engineering (Q1)
Instrumentation (Q1)
Statistics and Probability (Q1)
Metrikler
35
Atıf
1
Yazar
3
Anahtar Kelime